We manufacture Wheel Nuts in Marine Grade 316 Stainless Steel (A4)

They are suitable to fit to the  Series 3 Landrover, the Landrover 90, Landrover 110, the Landrover Defender and Discovery and Range Rover which have Steel Type Wheels fitted to them and have wheel studs which are 16mm x 1.5. The hexagon size is 27mm and the closed end protects the thread from damage and the stud from corrosion. The internal thread length is 22mm, which is long enough to accommodate fully most standard studs These parts do not rust or rust to the stud!

The stainless parts are supplied, CNC turned and hand polished, they are easily washed off with the hose and do not tarnish so avoiding those nasty rusty streaks which spoil the look of the wheel. Good wheels on Land Rovers are often ruined by the look of rusty open ended nuts. Why not give yours a birthday treat!

GREAT NEWS FOR YOU SERIES ONE AND SERIES TWO OWNERS      !!!!!!!!!!!!!

We have Polished Stainless Nuts with 27mm Hex with a 9/16 BSF Thread and a closed end......Yes you lucky people, to fit the Series One and Series Two (and some 2A). Look identical to WN1615LRS with the 9/16 BSF thread. Simple Eh! and just what you have been asking me for for 5 years. Buy them quick we only have a few sets left for January 2010

We also manufacture them in medium carbon steel and then hard chrome plate them with either a Black or Red or Blue decorative finish or just a plain Bright Chrome finish. They give the wheels a real lift, blend with vehicle colours and are very modestly priced. These are sized as per the stainless ones but are slightly longer with an internal thread length of 26mm, which accommodate even longer studs. They also take away the "rusty" and worn look from clean wheels and have all the benefits of stud protection.

The carbon steel parts can be supplied:-

• Hard Chrome Plated with a Black Finish
• Hard Chrome Plated with a Bright Chrome Finish
• Hard Chrome Plated with a Red Finish
• Hard Chrome Plated with a Blue Finish...(Sorry Discontinued)

 
We currently lovingly manufacture these in small batches to suit the “Classic Vogue” Type Aluminium Wheel which has a 27mm Hexagon head and a 38mm location diameter. They can be fitted to all makes of Landrover from Series 3 up to the Range Rover. They fit all vehicles with 16mm x 1.5 threaded studs. They are made from 316 stainless steel and is a beautiful version of the standard OEM nut including a hand polished head and a captive washer. As they are made from solid stainless so gone are the worries about lost caps and rust inclusion under the caps creating streaks. These are the real McCoy! They are designed for the customer who settles only for the best!

We also supply the smaller 22mm hexagon version which is designed for 2006 plus Range Rover and Discovery 3 having the 14mm x 1.5 Wheel Stud, 23mm Bore diameter and 34mm Counter Bore diameter. Ideal for fitting later wheels to the P38 but will NOT FIT OLDER THAN 06 LM322 Series vehicles .We also supply the version for the Earlier LM322 Models which have a 20mm Bore Diameter and a 30mm Counter Bore, they were usually supplied as a black finished nut. In all other respects the nut is the same as the sport version. Ring Phil and discuss this very important aspect before ordering. Please note you must match the nut you want with the wheel you want to fit. These too are hand polished and are from 316 marine stainless. Bespoke quality is rare today, and we take a pride in these fabulous components!

The main sets are sold in quantities of 20 or 16 in case you wish to add a set of Locknuts to your purchase, which we sell in sets of 5 made from carbon steel and hardened with a matching Stainless cover cap.

We would be happy to chat about any of specific your requirements. Please give Phil a ring on 07889 609509 

We usually make to special order, although sometimes we have the odd set in stock. Typical are the ones for TX ALLOYS pictured in the photograph to the right or for WOLFRACE and COMPOMOTIVE types in the photograph on the far left.

WE HAVE STOCK OF THE WOLFRACE/COMPOMOTIVE TYPE NOW !(Jan 2010) beautifully fine turned on CNC and fully hand polished from 316 Stainless, crafted for a lifetimes non corrosive service. We only have two sets so ring immediately for specification and price before they go.

IS THERE ANY INTEREST OUT THERE FOR THE TX ALLOY TYPE?  We are thinking of making three sets, so can quote a reasonable price if somebody needs just one set. Give me a ring if it is of interest.

Ring Phil to discuss if you have a requirement for specials on 07889 609509