If you need advice or wish to order by phone please call 07583 759374

Out of Stock

Available again soon

Out of Stock

Available again soon

Out of Stock

Available again soon

Out of Stock

Available again soon

Corrosion resistant wheel nuts to fit to the  Series 3 Land Rover, Land Rover 90, Land Rover 110, Land Rover Defender, Land Rover Discovery 1 and Classic Range Rover with steel wheels and 16mm x 1.5mm wheel studs. The hexagon size is 27mm and the closed end protects the thread from damage and the stud from corrosion. The internal thread length is 26mm, which is long enough to fully accommodate standard studs and most longer studs.


The unpolished stainless and black plated versions are also available for the Series 1 and 2 with a 9/16 BSF thread - see below.


Perfectly good wheels on Land Rovers are often ruined by the look of rusty open ended nuts. Why not give yours a birthday treat!

Combining Corrosion Protection with Enhanced Appearance

Wheel Nuts for Land Rover &

Range Rover with Steel Wheels

Hand polished CNC machined marine grade stainless wheel nuts. These are the same as the plain versions above, hand polished to achieve a superb visual appearance. The fabulous hand polished finish gives them extra sparkle that exudes quality.




Wrington Part WN1615LRSPOL - Polished S/S closed end nut - for 16mm studs

CNC machined marine grade stainless wheel nuts. They are easily washed off with a hose and do not tarnish or corrode to the stud, so avoiding those nasty rusty streaks which spoil the look of the wheel. They are maintenance free and designed to last a lifetime.



Wrington Part WN1615LRS - S/S closed end nut - for 16mm studs

Unpolished Marine Grade Stainless Steel Wheel Nuts to fit Defender, Series 3, Late Series 2A, Discovery 1 and Classic Range Rover - for Steel Wheels only

CNC machined medium carbon steel wheel nuts with zinc nickel plating and black passivate finish. Tested to 720 hours plus neutral salt spray endurance to provide long life on the vehicle before replacement or re-coating is required. They give the wheels a real lift and provide an alternative colour option to the stainless nuts.   

Wrington Part WN1615LRBLK - Black plated closed end nut - for 16mm studs

Exactly as above but with a 9/16 BSF thread to suit the Series 1, 2 and some 2A’s.


This is the BSF thread version for Series 1 and 2 vehicles (and some 2A’s) with original 9/16 BSF studs. Your Series vehicle may have been retro-fitted with newer 16mm  hubs and studs so please measure your studs or ask us.

Wrington Part WN916BSFBLK - Black plated nut for steel wheels with 9/16 studs

Black Zinc Nickel Plated Steel Wheel Nuts to fit Series 1 and 2 Land Rover Steel

CNC machined medium carbon steel wheel nuts with nickel zinc plating and clear passivate finish. Tested to 300 hours plus hot salt spray endurance to provide long life on the vehicle before replacement or re-coating is required. A cost effective upgrade for your vehicle.

Wrington Part WN1615LRCLR - Clear plated nut for Defender steel wheels - 16mm studs

Please see P & P rates below



WN1615LRS Single Nut

£ 4.00

WN1615LRS Set of 16 Nuts

£ 64.00

WN1615LRS Set of 20 Nuts

£ 80.00

Please see P & P rates below



Please see P & P rates below



Please see P & P rates below



WN1615LRSPOL Single Nut

£ 6.00

WN1615LRSPOL Set of 16 Nuts

£ 96.00

WN1615LRSPOL Set of 20 Nuts

£ 120.00

WN1615LRBLK Single Nut

£ 3.00

WN1615LRBLK Set of 16 Nuts

£ 48.00

WN1615LRBLK Set of 20 Nuts

£ 60.00

WN916BSFBLK Single Nut

£ 3.00

WN916BSFBLK Set of 16 Nuts

£ 48.00

WN916BSFBLK Set of 20 Nuts

£ 60.00

WN1615LRCLR Single Nut

£ 2.50

Qty:

WN1615LRCLR Set of 16 Nuts

£ 40.00

Qty:

WN1615LRCLR Set of 20 Nuts

£ 50.00

Please see P & P rates below



IF YOU HAVE ANY QUERIES PLEASE CONTACT US VIA OUR CONTACT PAGE OR PHONE

FRANK OR MEL ON 07583 759374


The classic Wrington Engineering capped stainless steel wheel nut exactly as above but with a smaller 14mm x 1.5mm pitch thread to suit the Discovery 2 with steel wheels only.




Wrington Part WN1415LRS - S/S nut for Discovery 2 with Steel Wheels only

Unpolished Marine Grade Stainless Steel Wheel Nuts to fit Discovery 2 with Steel Wheels

Please see P & P rates below



WN1415LRS Single Nut

£ 4.00

WN1415LRS Set of 16 Nuts

£ 64.00

WN1415LRS Set of 20 Nuts

£ 80.00

POSTAGE AND PACKAGING RATES


UK P & P is £4 for up to 5 nuts or £10 for 6 nuts or more.


European P & P is £15 for up to 5 nuts or £25 for 6 nuts or more.


USA and Canada P & P is £20 for up to 5 nuts or £30 for 6 nuts or more.


Australia, NZ, H Kong, Singapore  is £32 for up to 5 nuts or £45 for 6 or more.


Please select your shipping zone at the checkout.


Customers in other regions please contact us to get a shipping quote before you order.



Hand Polished Marine Grade Stainless Steel Wheel Nuts to fit Defender, Series 3, Late Series 2A, Discovery 1 and Classic Range Rover - for Steel Wheels only

Black Plated Wheel Nuts to fit Defender, Series 3, Late Series 2A, Discovery 1 and Classic Range Rover - for Steel Wheels only

Clear Plated Wheel Nuts to fit Defender, Series 3, Late Series 2A, Discovery 1 and Classic Range Rover - for Steel Wheels only

Exactly as above but with a 9/16 BSF thread to suit the Series 1, 2 and some 2A’s.


This is the BSF thread version for Series 1 and 2 vehicles (and some 2A’s) with original 9/16 BSF studs. Your Series vehicle may have been retro-fitted with newer 16mm  hubs and studs so please measure your studs or ask us.



Wrington Part WN916BSFS - S/S nut for Series 1, 2 and early 2A’s - 9/16 BSF

Unpolished Marine Grade Stainless Steel Wheel Nuts to fit Series Land Rover Steel Wheels

Please see P & P rates below



WN916BSFS Single Nut

£ 4.00

WN916BSFS Set of 16 Nuts

£ 64.00

WN916BSFS Set of 20 Nuts

£ 80.00

Original style open ended Land Rover wheel nut. This nut is the same size and style as the Land Rover original RRD500010 but the Wrington version is machined from solid 316 stainless steel that will remain rust free and bright. The top and taper have a high quality machined finish and the hex faces have a rolled mill finish.

Wrington Part WN1615LRO - 316 Stainless Steel version of Land Rovers RRD500010 original open ended nut - 16mm x 1.5mm pitch thread

WN1615LRO Single Nut

£ 2.50

WN1615LRO Set of 16 Nuts

£ 40.00

WN1615LRO Set of 20 Nuts

£ 50.00

Please see P & P rates below



Unpolished Marine Grade Stainless Steel Open Ended Wheel Nuts to fit Defender, Series 3, Discovery 1, late Series 2A and Classic Range Rover - for Steel Wheels only


Out of stock - back soon